Axles / Trailer Accessories - Page 4 - Huge Savings! Save up to 20%


Huge Savings! Up to 20% off on Axles (in Trailer Accessories) at Schemenauer Farms, Page 4 [72]. Top brands include Rockwell American, Rigid Hitch, sthus, The ROP Shop, R and P Carriages, Tekonsha, Ultra-Tow, Robert Axle Project, Yukon Gear, TK Axles+, & Tie Down. Hurry! Limited time offers. Offers valid only while supplies last.



3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (95" Hubface, 80" Spring Center)
By Rockwell American
In Stock
$333.02

mpn: TS, ean: 0719975184614,

4.7 out of 5 stars with 44 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle- Running Gear Set - Made in the US


Round Stock - Trailer Axle Spindle For 1-1/16 Inch I.D Bearings
By Rigid Hitch
In Stock
$22.16

mpn: SA-1350,

4.9 out of 5 stars with 8 reviews
This round trailer axle spindle is made from cold rolled steel and carries a 1,350 pound rating. The bearing surfaces are 1-1/16'' diameter and the mounting surface is 1-1/4'' diameter. Includes nut,washer and cotter pin. Using TWO of these spindles would make the capacity to 2,200 lbs of gross trailer weight.1-1/16'' diameter bearing surfaces - 1ΒΌ'' diameter mounting surface. 1,350 lbs Capacity - 1''-14 Thread. Seal diameter - 1.23. Inner/outer bearings, seal not included - Nut, washer and cot


sthus 15mm 245mm Three Spacers Front Rear Wheel Axle Fit 150cc Pit PRO Trail Dirt Bike
By sthus
In Stock
$10.50

mpn: AMWZMB1061, ean: 6941269913561,

4.5 out of 5 stars with 42 reviews
Description:150cc 250cc 125cc PIT Trail Dirt Bike1*Front Wheel Axle With SpacersLENGTH OF AXLE around 245mm DIAMETER OF AXLE around 15mm150cc 250cc 125cc PIT Trail Dirt Bike. package include:1*Front Wheel Axle With Spacers. Replacement parts,non original.. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm). We provide clear pictures, measurements where possible. Please compare its appearance, shape and size with your original unit and make sure that it can fit your mach


3,500 lb Idler Trailer Axle with Double Eye Springs and U-Bolts ( 95" Hub Face, 80" Spring Center ) 5 Lug on 4.5 Bolt Pattern
By Rockwell American
In Stock
$313.83

mpn: TS35950800545IBC, ean: 0719975184683,

4.2 out of 5 stars with 22 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA. This Axle Kit Includes: (1) Idler Axle with Hubs, Bearings, Lugs & Nuts, (2) Double Eye Springs, (1) U-bolt Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection


The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
By The ROP Shop
In Stock
$71.99
$57.59
You Save: 20%

mpn: 1002000002_1,

4.0 out of 5 stars with 13 reviews
(Pack of 2) Trailer Axle Kits with 4 on 4'' Bolt Idler Hub & 1'' Round BT8 Spindle Please review all product information to ensure that this product is compatible with your unit. A Message to the CustomerThe ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully rev


R and P Carriages 7000# Tandem Axle Spring Hanger Kit
By R and P Carriages
In Stock
$55.90

mpn: SHK-TA-SB-LE,

4.9 out of 5 stars with 57 reviews
This Is A Complete Spring Hanger Kit For tandem Trailer Axle Fits 1- 3/4'' wide Springs (used on 2,000#, 3,500#, 5,200#, 6,000# and 7,000# Axles) Set Includes: Two Rear Hangers - 1 1/2'' To Bolt Hole TWO Center Hangers - 2 1/2'' To Bolt Hole Two Front Hangers - 1 1/2'' To Bolt Hole Eight Shackle straps 2.6'' Fourteen Bolts 9/16'' x 3 Fourteen Locking Hex nuts Two Equalizers - 7.75 bolt centers Notes: Not for ''slipper springs'' (bolt in one end only, other end just slips) When used with ''standa


Tekonsha 5009 Dexter 10" X 1 1/2" Axle Set - Shoe and Lining Kit
By Tekonsha
SKU: #855009
In Stock
$64.60

sku: 855009, mpn: 5009, ean: 0030999741370,

4.8 out of 5 stars with 51 reviews
Shoe and Lining Kit (axle set) for Dexter 10'' x 1 1/2''Dexter Shoe and Lining Kit (Axle Set). Ref # 11 on diagram.


Ultra-Tow 3500-Lb. Capacity Complete Axle Kit - 4in. Drop Axle, 89in. Hubface, 74in. Spring Center, 5-Stud Pattern, 4.5in. Hubs
By Ultra-Tow
In Stock
$279.99
$259.99
You Save: 7%

mpn: 61314,

4.2 out of 5 stars with 55 reviews
The Ultra-Tow Spring Axle Kit features durable welded spring seats with double-eye springs for smooth-riding comfort. Complete axle kit includes springs, shackles, U-bolts, hangers, hubs and hardware. Also includes castle nuts, cotter pins and washers. Assembly required. Made in U.S.A. Leaves qty. 4, Bolt Circle Pattern in. 4 1/2, Axle Drop in. 4, Springs Included Yes, Inner Bearing Size in. 1 3/8, Weight Capacity lbs. 3,500, Spring Centers Length in. 74, Spring Seats Welded, Studs qty. 5, Brake


Ultra-Tow 2000-Lb. Capacity Complete Axle Kit - 60in. Hubface, 48in. Spring Center, 4-Bolt Pattern, 4in. Hubs
By Ultra-Tow
In Stock
$219.99
$199.99
You Save: 9%

mpn: 61310,

4.8 out of 5 stars with 43 reviews
The Ultra-Tow Spring Axle Kit features durable welded spring seats with double-eye springs for smooth-riding comfort. Complete axle kit includes springs, shackles, U-bolts, hangers, hubs and hardware. Also includes castle nuts, cotter pins and washers. Assembly required. Made in U.S.A. Springs Included Yes, Spring Length in. 25 1/4, Brakes Included No, Leaves qty. 3, Outer Bearing Size in. 1 1/16, Axle Outside Diameter in. 1 3/4, Studs qty. 4, Axle Tube Type Round, Inner Bearing Size in. 1 1/16,


Rockwell American 3,500 lb Trailer Idler Axle with Leaf Springs & U-Bolts - 5x4.5 Bolt Pattern (84" Hubface - 70" Spring Center)
By Rockwell American
In Stock
$313.83

mpn: TSRG545IBC, ean: 0733781137954,

4.6 out of 5 stars with 13 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Made in the USA. This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bear


Robert Axle Project BOB Trailer 12mm Thru Axle, Length: 174 or 180mm Thread: 1.75mm
By Robert Axle Project
In Stock
$62.00
$61.99

mpn: BOB111, ean: 0602150467247,

4.2 out of 5 stars with 42 reviews
The Robert Axle for BOB Trailers are specifically engineered to attach the proven BOB Trailer to a thru axle equipped bike. Machined and tested in the USA, the BOB Trailer axles are designed for maximum strength and ease of use. Stainless steel axle ends for attaching stock BOB Bobbins (Bobbins are NOT included; Customer must provide bobbins from stock BOB quick-release)Axle shaft is machined from 7075 aluminum and hard anodizedEasy installation using a 5mm Allen keyEndorsed and approved by BOB


Tandem Axle Trailer Parts Kit - (95" Hubface - 80" Spring Center) - 7,000 lb Capacity - Brakes on 1 Axle - Made in USA
By Rockwell American
In Stock
$1,480.00

mpn: Tandem 3.5k TPK, ean: 0733781137077,

4.2 out of 5 stars with 31 reviews
This trailer kit has all the hardware needed for you to build your own trailer, except for the steel frame. Includes a 11 oz Johnson Trailer Parts Kit. ***Disclaimer***Free shipping to a commercial/ business address or a freight terminal near you. If shipping to a residential location there will be an additional charge depending on location. Call for details. (602) 292-9690.Rockwell American Tandem 3,500 lb Axle Trailer Parts Kit - 7,000 lb Capacity - with TecNiq LED Lights. This Kit Includes: (


Yukon Gear & Axle (YHC70003) Locking Hub Kit for Dana 60 30 Spline
By Yukon Gear
In Stock
$323.61
$320.12
You Save: 1%

mpn: YHC70003, ean: 0883584290841,

4.2 out of 5 stars with 14 reviews
Yukon Hardcore Locking Hubs provide manual locking via an all steel construction. Designed for off-road, street and towing usage.Limited Lifetime Warranty. All Steel Construction. Low Profile Bezel to Reduce Impact with Obstacles. Defaults to Locked Position. Complete Install Package.


Rigid Hitch 1,000 lb. Torsional Stub Axles With 5-Bolt on 4-1/2 Inch Hubs (TSA-10150)
By Rigid Hitch
In Stock
$262.56

mpn: TSA-10150,

4.4 out of 5 stars with 26 reviews
PERFECT item to build your own custom motorcycle trailer!Torsional stub axles use specially formulated ''rubber'' cords to cushion the turning of the inner bar to create the best suspension on the market today. This progressive torque action provides the best shock absorption, load handling and durability features that are available for all types of trailers. The independent action of each wheel reduces shock transfer and trailer sway.Includes (2) torsional stub axles with 1'' straight spindles,


7k-7000 Lb Capacity 12x2 Electric Brake Trailer Axle 8 Lug-Dexter Compatible (Add U Bolts, 89" Hubface-74 Spring Center(6'4Frame))
By TK Axles+
In Stock
$509.99

mpn: 7brax, ean: 0742309824740,

4.1 out of 5 stars with 8 reviews
This is a TK Axles Plus Axle. Built in the United States and COMPLETELY Dexter Interchangeable. Capacity - 7000 lbs, Lugs - 1/2 inch, inner Bearing - 25580/25520 Outer Bearing - 02475/02420, Color - Black, Bolt Pattern - 8x6.5,Tubing OD x Wall - 76mmx6.3mm,Weight - 250,Lubrication - Easy Grease Axle Cap, Parts - Dexter Interchangeable. Brakes are 12x2. Add on the springs and U bolts and you are ready to hang your axle. Spring Specs: 5 Leaf, 2 in wide, 7000lb capacity slipper springs. Axles are s


3,500 lb Standard Idler Trailer Axle - 73" Hubface, 58" Spring Center - Bolt Pattern 5x4.5 ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts)
By Rockwell American
In Stock
$249.99

mpn: TS35730580545IBC, ean: 0733781136643,

4.6 out of 5 stars with 16 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Complete Rockwell American 3,500 lb Idler Axle - Made in the USA. 3,500 lb Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty) & (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection. 5 Lug on 4.5 Bolt Pattern (other bolt patter


Trailer U-Bolt Kit for 3" Round Axles - 5,200lb - 7,000lb Axles - For 2" Wide Springs
By Rockwell American
In Stock
$29.49

mpn: LBL004, ean: 0733781136940,

4.2 out of 5 stars with 48 reviews
Mount Your Round 3'' Diameter Trailer Axle to Your Trailer's 2'' Wide Leaf Springs with this U-Bolt Kit. Included Parts - (4) U-Bolts ( 9/16'' - 18 x 7'' Long ), (2) U-Bolt Plates, (8) 9/16'' - 18 Hex Nuts, (8) 9/16'' Split Lock Washers. Complete U-Bolt Kit.Mount Your Round 3'' Diameter Trailer Axle to Your Trailer's 2'' Wide Leaf Springs with this U-Bolt Kit. (4) U-Bolts ( 9/16'' - 18 x 7'' Long ). (2) U-Bolt Plates. (8) Hex Nuts (9/16'' - 18). (8) Split Lock Washers (9/16'').


Tie Down Engineering 5-Lug Hub/Spindle End Unit for Build your own Trailer Axle System - 1750-Lb. Capacity Per Hub, Model Number 80117
By Tie Down
In Stock
$79.99

mpn: 80117, ean: 0081628801170,

4.7 out of 5 stars with 50 reviews
Tie Down Engineering components make it possible for you to build trailer axles that exactly fit your specifications. By choosing the hub, spindle and axle tube you need and building it yourself, you save money and get a better result. Axle tubes are available in 1500- or 3500-lb. capacities, with corresponding spindles and hubs. Axle tubes are 72in. long and can be cut to the exact length needed for your application. Welding an axle requires the proper equipment and skill needed to apply a prop


TK Axles+ 5.2k-5200 Trailer Idler Axle 6 Lug-Dexter Compatible (with U Bolts, 73" Hubface-58 Spring Center(5'0Frame))
By TK Axles+
In Stock
$294.99

mpn: 52idlerax, ean: 0742309824153,

4.5 out of 5 stars with 35 reviews
This is a TK Axles Plus Axle. Built in the United States and COMPLETELY Dexter Interchangeable. Capacity - 5200 lbs, Lugs - 1/2-20 inch, Color - Black, Bolt Pattern - 6x5.5,Tubing OD x Wall - 3'' x .188'',Weight - 110,Lubrication - Easy Grease Axle Cap, Parts - Dexter Interchangeable. Add on the springs and U bolts and you are ready to hang your axle. Axles are straight. Underslung - Axle is welded with spring seats on the bottom.5.2k-5200 lb capacity idler axle-Dexter Compatible. Axle comes ass


3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (61"Hubface, 46" Spring Center)
By Rockwell American
In Stock
$333.02

mpn: TS, ean: 0719975184577,

4.4 out of 5 stars with 54 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the U



Viewing Page 4 of 5



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - schemenauerfarms.com. All Rights Reserved.